Samsung syncmaster 700ift manual

Next Page. Page 2 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co. Samsung Electronics Co. Page 4: Safety Instructions Safety Instructions Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designa- tion of the DC adapter corresponds to the local electrical supply. Never insert anything metallic into the monitor openings.

Doing so may create the danger of electric shock. If any items are missing, contact your dealer. Cable connections Turn off your computer and unplug its power cord. If you are using an IBM-compatible computer, skip to step 5.

If you are using a Macintosh computer, connect the other end of the signal cable to a Macintosh adapter. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Follow the directions given below according to the version of your Windows Version 4. Monitor self test screen The three boxes inside the border are red, green and blue.

Failure of any of the boxes to appear indicates a problem with your monitor. All of these adjustments are made using the control buttons on the front of the monitor. Page Automatic Save Adjusting Your Monitor Power indicator This light glows green during normal operation, and blinks amber once as the monitor saves your adjustments.

Power button Use this button to turn the monitor on and off. Automatic Save Whenever you open the on-screen menu and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made.

Follow the instructions below to adjust the features. The available range is between to K. With the menu off, push the Push the button or Page Sync. Input Type Separate Sync. Solution: Application Date: March 9, Because of this, the user may feel a slight electronic shock when touching the screen or D-sub connector.

Cause: Solution: Capacitors C and C Change the value of capacitors C and C Bulletin No. The customer may complain about this. Cause: Solution: V supply line Change the values of components in V line. Cause: Solution: Insufficient thermal characteristic of capacitor CS Change the characteristics of capacitor CS This can cause a mismatch between the control board and the micom, causing improper operation.

Cause: Solution: CS Permanent solution : Change PCB pattern from ver 1. For all MP 1. See page 2 for additional information.

Part No. Description Part No. Bending angle: 45 degree Without the st proper programming, when the monitor is 1 turned on and the PC is powered up, there may be incompatibility between the PC's video adapter and the monitor.

The DDC procedure and files can be found on www. Click here for DDC Procedure. Description Par. Applying the manual degauss function can clear up the problem. The function is provided by D If the monitor is turned on while the PC is in power saving mode DPMS the monitor will not degauss due to the hot plug function.

This results in a purity symptom. This problem can be caused with some PCs if the monitor is powered up seconds after the PC has been powered up. If the user then applies manual degauss or powers down and powers up the monitor again, the purity symptom will disappear.